VCT floor care is an art and requires the proper equipment, products and know how. All three are absolute requirements and anything less will not produce the best professional results possible.
As usual, my floor stripping service will include the following:
First, we will thoroughly vacuum the entire area to be serviced.
Then, we will strip all included VCT tile, removing all the old wax (even in the many corners). The entire area will be rinsed and neutralized and completely dried. We will re-vac to make double sure all possible dirt and debris is removed from the floor. Your floor is now prepared for its new finish.
Next, we will apply three to five coats of sealer/finish to restore and protect your VCT investment (high traffic areas really should have a minimum of 3 to 5 coats to protect them properly). Each coat will be allowed to thoroughly dry before additional coats are applied. Part of our service may include high speed buffing between coats to further insure the best professional results possible.
This service will require that everyone stay off the floors being refinished until the final coat is completely dry. We use only the finest hospital grade, co-polymer acrylic floor finish available to the industry which has been top rated for maximum shine, slip / scuff resistance and durability. Once refinished, your floors will be fully protected and will look fabulous! Your staff and customers will love how they look too!
How you maintain your floors on a day to day basis will dictate how they look and how long the finish will last. I recommend daily vacuuming and washing along with a regular schedule of as needed machine scrubbing, buffing and top coating. This will help to avoid the need to strip and refinish so often. I would be happy to give you a quote for providing these services.
With daily vacuuming and washing, as needed buffing, top coating and occasional stripping and refinishing, your VCT floors should last for decades and will always look their best for your staff and customers. The key is regular maintenance.
The Cleaning Guy
PO Box 1438
Concord, NH 03302
Phone: 603-410-6449
operez@foxfirenh.com
*Required